Fast Ethernet Transceiver Specifications
CTX-1070 · CFX-107X · CT4-1030
Product Specifications
|
 |
CTX-1070
Being 100Base-TX compliant, the CTX-1070 is capable of operation in either half duplex or full duplex mode. The unit automatically senses and switches to accommodate for the full or half duplex nature of the transmission. The CTX-1070 automatically operates in either 10Base-T or 100Base-TX mode. The unit has seven diagnostic LEDs which monitor eight different functions. Like all 100BaseTX products, the CTX-1070 must operate with Category 5 or STP cable.
Diagnostic LEDs
- Power
- Transmit
- Receive
- Link
- Auto Polarity/Full Duplex
- Collision
- 100Mbps
CFX-107X
Canary has manufactured four models of the 100Base-FX transceivers. These units support full or half duplex operation. All of these transceivers transmit and receive over multi-mode, duplex 50/125, 62.5/125 and 100/140 fiber optic cable.
- The CFX-1071 has a duplex fiber optic interface SC-type connector, and a full duplex transmission range of 2km.
- The CFX-1072 also has an SC-type connector, with a 500m full duplex transmission range.
- The CFX-1073 has a plug and socket ST-type connector and a 2km full duplex range.
- The CFX-1074 has an ST-type connector and a 500m full duplex transmission range.
In half duplex mode, all four transceivers are limited to a transmission range of 412 meters. Each unit features seven diagnostic LEDs.
Diagnostic LEDs
- Power
- Transmit
- Receive
- Link
- Full Duplex
- Collision
- 100Mbps
Switch Selection
CT4-1030
The Fast Ethernet specification 100Base-T4 is able to send and receive over standard Category 3, 4 or 5 cable. This allows high speed networking over the ubiquitous 10Base-T Cat 3 UTP cable. 100Base-T4 only operates in half duplex.
Diagnostic LEDs
Switch Selection
- Auto Negotiation/Manual
- 10/100 Selectable
Send me back to the Canary Fast Ethernet Transceiver Page