Fully software configurable, includes EISA configuration file
Additional Features for PCI models
- DECchip 21140 LAN coprocessor chip
- 132 MByteslsec. burst data rate across the PCI bus for maximum performance
- Self-configuring design for "plug and go' operation
- Integrated 2 KByte transmit and 4 KByte receive FIFOs (First In, First Out memory)
The Combo Option - Universal Connectivity and Upgrade Path
The EM 110 T4 Combo achieves universal cable connectivity by providing
a BNC coax connector. You can connect to your old coax network now,
and still be prepared for the eventual upgrade to Fast ethernet.
AutoSense configuration provides flexibility
The AutoSense feature of EM 110 T4 allows the adapter to detect the
maximum line speed of your network automatically. Simply connect the
EM 110 T4 to any existing 10BASE-T or 1 OOBASE-T4 network device of
any speed; no adapter configuration is necessary. For maximum flexibili-
ty, this AutoSense feature is compatible with all 1 0 and 1 00 Mbitstsec.
devices, including those without NWAY line speed negotiation.
Category 3 UTP support provides low-cost upgrade
T4 suppose means that you don't have to upgrade your cabling plant.
EM1 1 0 T4 will run on any UTP cable you are currently using for
1OBASE-T. Run the EM 110 T4 now at 10 Mbits/sec., or 2OMbits/sec. Full
Duplex, and in the future run at 100 Mbits/sec. using the same adapter
and the same cable.
High bandwidth networking
Ten times faster than traditional 10 Mbits/sec. Ethernet adapters,
EM 110 T4 Fast Ethernet is ideal for resource-intensive graphics, multi-
media, Microsoft Windows, and mission-critical applications which need
high throughput and low CPU utilization to power large amounts of data
across the network.
Product Specifications
Systems Supported
PCI Lc)cal Bus computers, based on
Intel, DEC Alpha, MIPS, and PowerPC
processors.
ISA and EISA bus computers based on
Intel processors
Bus Interface
ISA, 16-bit 1/0 mapped
EISA, DMA burst mode transfer
PCI, 32-bit bus master
Ethernet Controller
DECchipl 21140 LAN coprocessor chip (PCI)
SMC 9lClOO FEAST Fast Ethernet
Controller (ISA and EISA)
Hardware Interrupts
PCI interrupt A, supports shared interrupts (PCI)
5, 9, 11 & 15, supports shared interrupts (EISA)
"Plug and Play,' or interrupts 5, 9, 11 & 15 (ISA)
Base LIO or Memory Address
Assigned by BIOS (PCI)
default 300h, 8 different possible choices (EISA)
Assigned by "Plug and Play,' or manually (ISA)
PCI Configuration Space
Supports DWORD, WORD, and BYTE access
Reliabil@ty
Calculated MTBF >100,000 hours
Power Requirements
+5 volts @ 1.5 Amp. max
Environmental Operating Range
Temperature: O' C lo 50' C
Relative Humidfty: 5% to 85% non-condensing
Altitude: 3000m maximum
Interface Connections
RJ-45 female
supports CAT 3, 4, and 5 UTP cabling
BNC connector
supports RG-58 coax for 1 OMbits/sec.
(10BASE-2)
Dimensions
5.075" x 3.9" (conforms to PCI Short Card
specification)
7.6'x 4.2" (EISA)
7.3'x 4.2' (ISA)
Standards Compliance
IEEE 802.3 10BASE-2
IEEE 802.3 1OBASE-T
IEEE 802.3u 100BASE-T4
Drivers Available
3.5' diskette
NetWare3.x, 4.x, NetWare Lite, Personal
NetWare, LAN Manager, VINES, OS/2 Warp,'
IBM LAN Server, Artisoft LANtastic, Windows
for Workgroups, DEC PATHWORKS for DOS
FTP PC/TCP, LAN Workplace for DOS
Windows NT for Intel, DEC Alpha, MIPS.
PowerPC, Windows 95, Windows for
Workgroups 3.11
Diagnostic LEDs
Link Integrity (one each for 10 Mbits/sec.
& 1OOMbits/sec.)
Network Activfty (one each for 10 Mbits/sec.
& 100 Mbftstsec.)
Warranty
All EMASTER+ series adapters are
protected by a limited Idetime warranty
Send me some more Info.
commkmj@kmj.com