Jaycor FC-1062 Fibre Channel Communications Adapter

Please click picture to request more detailed information

Features

• Fibre Channel FC-PH Rev 4.3 compliant
• Baud Rate - 1.062 Mbits/s
• Data Rate - up to 60 Mbytes/s
• Supports all FC-PH classes of service including intermix
  • Class 1: Dedicated
  • Class 2: Multiplexed
  • Class 3: Datagram
• Supports switched fabric and arbitrated loop configurations
• Communications drivers for standard network protocols including
  • TCP/IP
  • SCSI
• Hardware assist for TCP/IP and SCSI
• Compatible with all common-speed Rev. Fibre Channel compliant equipment
• Open command structure supports user-developed communications drivers
• Simple installation and servicing requiring no adjustments or maintenance
• Board operaties as SBus DMA master for maximum throughput

Fibre Channel Adapter Sample Configuration

Specifications

Physical Dimensions
  Single-Slot SBus Module



Power Requirements
  Volts         Amps
  +5 VDC        1.7 A 


Environmental Conditions
  Operating Temperature:                 0 to 60 Degrees C
  Storage Temperature:                 -40 to 75 Degrees C
  Relative Humidity -Storage:    5% to 95% (noncondensing)
  RelativeHumidity-Operating: 8%to8O%(noncondensing)



Safety/Emissions
  Optical:  Fibre Channel FC-PH OFC/IEC 825
  EMI:      FCC Class B



Optical

  Data Rate                      1.062 Mb/s
  Wavelength                        780 nm
  Launch Power                -4.7 to 0.9 dBm (avg)
  Min. Sensitivity               -17 dBm (avg)
  Max. Receiver Input             0 dBm (avg)
  Recommended Fiber              50/125 micron
    Bandwidth                 500 MHz at 850 nm
    Attenuation               3.0 dB/km at 850 nm
  Transmission Distance              2 km


Warranty
  1 Year



Standards
  ANSI X.3.230 - 199X

I'd like some more information

Back to the Product Page