TigerSwitch XFE


Ethernet Intelligent Workgroup Switch 10BASE-T, 100BASE-TX Ports


Please click image to request more information

Intelligent Bandwidth Acceleration for Workgroups

With its high port density, and its management and filtering capa bilities, SMC's TigerSwitch XFE can easily meet the requirements of today's growing Ethernet workgroups. An ideal companion to SMC's SwitchReady family of TigerStack hubs, this 17-port, rack mountable switch provides a full 10 Mbps of bandwidth to each of its sixteen 10BASE-T ports and 100 Mbps to its 100BASE-TX port. Its 260 Mbps of aggregate bandwidth can be allocated across the work- groups and to servers and power users as required.

This full-featured segment switch employs a buffered "store-and- forward" architecture that performs error checking to prevent bad packets from being propagated throughout the network. Its non- blocking design allows simultaneous wire-speed transport of multiple packets at consistently low latency. The switch also supports Spanning Tree Protocol, which provides a measure of fault tolerance by allowing secondary network paths to be created.

An SNMP agent is included, so SMC's EliteView and other SNMP-based management applications can collect and display status and performance information about the switch, and perform needed configuration and control functions. Network management can also be performed in-band using the popular TCP/IP application, Telnet, and out-of-band via a serial console port.

The TigerSwitch XFE is backed by a one-year warranty and free technical support, so you can be sure you're getting the quality, reliability and value you've come to expect from SMC.


Features/Benefits

Outstanding Performance

Easy to Install and Use

Easy to Troublesboot

Compatible

Reliable

Product Specifications


  Ethernet Interface
      Ports 1 to 16
         10BASE-T
         RJ-45 connector
         Fixed crossover
      Port 17
         100BASE-TX
         RJ-45 connector
         Fixed crossover
  Network Interface
      10BASE-T
         RJ-45 (UTP Cable; EIA/TIA Categories 3, 4, 5)
      100BASE-TX
         RJ-45 (UTP Cable, EIA/TIA Category 5)
  Architecture
      Bus
  Buffer Architecture
      Central memory, dynamic allocation
         2 Mbytes
      Block size
         256 bytes/block
  MAC Addresses
      Table entries
         16,000 per switch
      Lookup
         Processor-based
  Network Bridging Functions
      Filtering
      Forwarding (store-and-fomard)
      Learning
  Aggregate Forwarding Rate
      193,000 pps
  Aggregate Filtering Rate
      387,000 pps
  Latency
      40 Vsec. plus packet size
  Size
      17.5 in.  W x 9.5 in.  D x 1.75 in.  H
      (44.45 cm x 24.13 cm x 4.45 cm)
  Weigbt
      Unit
         10.0 lb, (4.54 kg)
      Shipping
         12.0 lb. (5.4 kg)

  Diagnostic LEDs
     Power - 1
     Test - 1
     Port Status - I per port
  Switcb
     Power
  Temperature
     Operating
        32' to 112' F (O' to 44' C)
     Storagc
        -161 to 144' F (-27' to 62' C)
  Humidity
     0% to 95%
  Power Supply
     Internal auto-ranging transformer
     100 to 240 VAC, 50 to 60 Hz
  Power Consumption
     60 W maximum
  Standards
     Ethernet
        IEEE 802.3, 802.3u, 802.ld
        ISO/IEC 8802-3
     MlBs
        MIB 1, MIB 11
        Bridge MIB
        Ethemet MIB
        Enterprise MIB
  Compliances
     CE marking
     Safety
        UL 1950
        CSA 22.2 No. 950
        TCV/GS/EN60950
     Emissions
        FCC Class A
        CDOC Class A
        VCCI Ctass 1
        CISPR Class A
     Immunity
        IEC 801-2.3.4
        EN 50082-1
  Warranty
     1 Year


I want some more information!
Send me back to the SMC product page